A Company
XZ06 Solvent Soluble Etch Resist
Although solvent soluble etch resists have largely been replaced by alkali soluble types, they are still preferred in some circumstances. The use of solvent has the advantage of avoiding the oxidation problems that sometimes make the removal of alkali soluble resists more difficult.

XZ06 is a traditional bitumen type resist but with the performance to meet modern production demands:

*Screen Defined (Usually printed with 100t/cm and 70-80 shore squeegee for best definition).

*Suitable for air drying or very fast oven drying [1 - 2 minutes at 120°C (248°F) or 3 - 4 minutes at 80 - 90°C (176 - 194°F) in an infra red oven.]

*Can be used on gold and titanium

*Suitable for common alkali and acid etches. Has good chemical Resistance. Suitable for use with Nitric and Hydrochloric solutions

*Solvent strippable in a wide range of aliphatic, aromatic and halogenated hydrocarbon solvents. Inexpensive solvents such as paraffin and naphtha can be used as well as trichlorethane vapour.

*XZ06 may also be stripped in Coates XZ39 Resist Fast Thinner.
Pack code CGSN7004 - click for Technical Information
Site Map | Contact Us | ©2004 Coates Circuits Products