Thermal Drying, Photo imageable, aqueous develop.
Suitable for acid etching only.
High Exposure sensitivity (10mJ – 15mJ/cm2) for LDI processing.
Excellent adhesion and conformation to copper and other metal surfaces.
Stripping solution of 3% potassium hydroxide @ 40°C is recommended, sodium hydroxide can also be used.
Resolution capability is up to & beyond 50µm (resolution is always dependant not just on the etch resist but customers develop & etch capability and production environment – clean room class 10,000 is recommended).
Single pack system with good shelf life.
-Application by screen print (horizontal or vertical) or rollercoat,
2% maximum XZ101 can be added for screen printing if required.
Print using 77-120T/cm with 70-75 shore squeegee
*This will give a DFT of 8-12 microns
The product must be diluted 10-15% with XZ95 for rollercoating For grooved rollers (~49GPI) 140-180sec (Ford No4) is required For smooth rollers 65-85 sec. (Ford No.4) is preferred

Versions:
CKXN0330 - Available in dark blue colour only & comes in 5KG packs.
( Requires thinning please see information above. )
V9966/3 – new screen print only version available for beta testing. Dark blue colour.

For technical information please contact your local Coates representative.